KYO-EI Kics Wide Tread Spacer, M12 x P1.25, 4H, PCD100, 20mm Thick, Pack of 2, 4020W3











Popis
■Bolt-on installation for factory and aftermarket aluminum wheels to upgrade to a wider tread. ■High-quality product (MADE IN JAPAN) manufactured under precise design and strict quality control. ■The hub bolts are made of chrome-molybdenum steel and feature hardened, high-strength, and durable bolts. ■These bolts are flush with the body, contributing to a stylish appearance. The wider tread improves cornering performance.
Vehicles that are not compatible ●Vehicles with 1, 4, and 8 license plate numbers;●Vehicles with drum brakes that do not have a flat mounting surface;●For special vehicles other than those listed above, please contact us.
Notes *Do not install on vehicles other than those manufactured in Japan. ●If the tire or wheel is subjected to a strong impact, excessive force may be applied to the wide tread spacer. Using this product as is may cause damage and lead to an accident. Therefore, do not use this product under any circumstances. ●Depending on the thickness of the spacer and wheel offset, installation on your vehicle may be impossible (protruding beyond the fender or contacting the wheel housing). Please check the condition of your vehicle before purchasing. ●Do not install on steel wheels, as their mounting surface is not flat. ●Before installation, be sure to remove any rust or dirt from the mounting surface on the back of the wheel and the vehicle hub side with a wire brush or similar tool. ●Do not apply oil or grease to the vehicle's hub bolts, spacer hub bolts, or mounting nuts. This may result in excessive tightening and damage to the bolts. ●Do not install if there are any foreign objects or protrusions on the vehicle's hub bolts or the back of the wheel. ●Do not install wide tread spacers if the bolts protrude beyond the spacer when installed on the vehicle's hub bolts. ●Wide tread spacers can be installed if there is a recess on the back of the installed wheel. However, do not install wide tread spacers if the recess is not deep enough to allow for sufficient clearance for the original stud bolts. ●Wide tread spacers cannot be installed on vehicles with drum brakes that have an uneven mounting surface or protrusions. Also, never install them on vehicles with steel wheels. ●Some vehicles have larger hub diameters and may not be able to accommodate wide tread spacers. Please check your vehicle's hub diameter and the inner diameter of the wide tread spacers before purchasing. ●After installing wide tread spacers, we recommend adjusting your alignment to prevent uneven tire wear. ●When installing on vehicles with sliding doors, be careful not to let the tire protrude. The tire may interfere with the sliding door, preventing it from opening. ●Please note that 10mm hub centric rings may not be compatible with vehicles with a hub height of 12mm or more, depending on the shape of the wheel mounting surface. ●We do not guarantee any malfunctions or damage caused by improper installation or handling. ●This wide tread spacer is a racing part and cannot be used on public roads.
Country of Origin: Japan Type: Single Item Packaging Size: 200.0mm x 100.0mm x 150.0mm Quantity: 2 pieces (2 pcs) Material: Aluminum (A2014) / Bolts (SCM435 Chromoly Steel)















