Description:
4channel multifunction relay control module, using industrialgrade highquality components, carefully designed and processed, stable performance, simple operation, can be widely used in various power control applications. The module presets up to 20 kinds of functions, uses 836V wide voltage power supply design, and adds the linkage function of each channel, users can freely combine many new applications, such as sequential linkage, cycle linkage and so on.
Features:
With 4 channels
of input and output control, each channel can be set to 20 kinds of functions to meet more application requirements.
DC 8v36v wide voltage input, with the function of power antireverse connection, will not damage the module due to wrong power connection.
With power indicator light and relay suction indicator light.
At least 1 second timing function can be set, accurate timing, error less than 1percent .
Add automatic power saving function.
All setting options can be automatically saved, the content of set won"t lost when power off.
Trigger signal input sup
ports user selection, high level or low level pulse triggering.
Key Function:
Menu 1:
FX Long press SET to enter menu 1, short press "+ " to adjust X to 0 ~ 3, corresponding to 1~4 channels
Short press SET to enter menu 2, short press "+ " to select X channel related Settings (07)
Menu 2:
X0 Function selection (00)
Short press SET to enter, short press "+ " to SET parameters 0 ~ 19, corresponding to function 1 ~ function 20
X1 T1 Hour (000)
Short press SET to enter, short press or long press "+ " to SET T1 hours (0255)
X2 T1 Minute (00)
Short press SET to enter, short press or long press "+ " to SET T1 minutes (059)
X3 T1 Second (00)
Short press SET to enter, short press or long press "+ " to SET T1 seconds (059)
X4 T2 Hour (000)
Short press SET to enter, short press or long press "+ " to SET T1 hours (0255)
X5 T2 Minute (00)
Short press SET to enter, short press or long press "+ " to SET T1 minutes (059)
X6 T3 Second (00)
Short press SET to enter, short press or long press "+ " to SET T1 seconds (059)
X7 Cycle times (0000)
Short press SET to enter, short press or long press "+ " to SET the number of cycles (09999)
Press SAVE to return or SAVE to exit
Electric Parameter:
Working voltage: recommended DC 8v36v (extreme working voltage DC 6v45v)
Rated power: Static power less than 0.1W
Dynamic power is less than 1.5W
Working temperature: recommended 20 celsius to 60 celsius
(limit working temperature range 30 celsius 70 celsius )
Load capacity: Normally open port: DC 030V 10A, AC 0250V 10A
Normally closed port: DC 028V 10A, AC 0125V 10A
Module Port:
Module voltagesignal input terminal: there are 8 line interfaces, all of which have terminals for user convenience
VIN: DC positive pole
GND: DC negative pole
OFF: Power control terminal
COM: Pommon end of photoelectric isolation signal input
IN1IN4: Input signal detection interface
Relay load output: 12 wire interface, all interfaces have terminals
Note:
The input signal detection interface can be either activehigh or activelow. The user can select via COM port. If COM is connected to H, IN1IN4 is active high, if COM is connected to L, IN1 IN4 is active low!
Specifications:
Material: ABS
Size: Approx. 85 x 75mm 3.35 x 2.95in
Weight: Approx. 88g
Package List:
1 x Relay Module
.With 4 channels of input and output control, each channel can be set to 20 kinds of functions to meet more application requirements
DC 8v36v wide voltage input, with the function of power antireverse connection, will not damage the module due to wrong power connection
With power indicator light and relay suction indicator light
At least 1 second timing function can be set, accurate timing, error less than 1percent
Add automatic power saving function
