Wspc-42013 Self-Drilling Washer Screws

Self-drilling washer screws 4.2x13 mm, 1000 pcs Self-drilling washer screw is made of surface-hardened carbon steel with a 5 µm zinc coating. The screw has a washer head and a self-drilling tip. Designed for fastening sheet metal to steel substrates, overlapping joints of thin steel elements, for steel profiles up to 2 mm thick, and for the production of door and window joinery. Most important parameters Model: WSPC-42013 Size: 4.2x 13 mm Maximum usable length: 3 mm Packaging: 1000 pcs. Socket: PH-2 Drilling capacity up to: 2 mm Material: electro-galvanized carbon steel Original Product of a Renowned Company KLIMAS Wkręt-Met ® Features and benefits 1. Washer head with socket PH The washer head ensures appropriate pressure on the attached element. 2. Self-drilling tip The ability to drill through connected elements up to a maximum thickness of 2 mm in a single operation, shortens assembly time. 3. Anti-corrosion coating - electroplated zinc coating Min. 5 μm of electroplated zinc coating guarantees high anti-corrosion resistance. Substrates and application examples A. Steel profile B. Steel ≤ 2 mm thick Fixing of sheet metal flashing Fixed corner flashing of a sandwich panel wall Fixed window flashing to a sandwich panel Fixed flashing around an entrance door Fixing of sheet metal flashing For fixing thin steel elements and plastics for steel profiles For fastening sheets to steel substrates Product specifications [ dw ] screw diameter: Ø 4.2 mm [ Lw ] screw length: 13 mm [ k ] head height: 2.3 mm [ F ] head diameter: 11 mm [ t fix ] maximum usable length: 3 mm socket: PH-2 number of pcs. in package: 1000 screw material: heat-hardened carbon steel galvanized drilling capacity: 2mm Certificate The screws were made in accordance with the PN-EN 14566+A1:2010 standard The screws we offer are characterized by the highest quality and can be safely used in construction. We make every effort to ensure that the products delivered to our contractors are safe and adapted to specific tasks. Installation method Before installation, identify the substrate, its thickness, and environmental conditions (expressed in terms of corrosivity), and then select screws that meet the above criteria. Select the correct screw type, length, and drilling capacity, which depends on the sum of the thicknesses of the connected elements. The drilling capacity for each screw is specified in the dedicated Technical Data Sheet and in the PN-EN standard and refers to the sum of the thicknesses of the connected elements. Set the optimal speed when screwing in; too high speeds can cause drill bits to burn and prevent proper fastening. Screw installation should always be carried out perpendicular to the substrate surface. KLIMAS screws - the most common choice of professionals *measuring tape is not included in the sale