Product Information:
Specifications:
Material: Polypropylene (PP)
Color: white
Rated voltage / frequency: 220V/50HZ
Cooling capacity: 1100W
Heating capacity:800W
Rated current: cooling 1.6A / heating 1.7A
Rated power: cooling / heating: 360W Maximum
input current: 2A Maximum
input power: 440W Maximum
working pressure on the suction side/exhaust side: 0.05/1.25MPa Maximum allowable
pressure on low pressure side / high pressure side: 0.05/1.25MPa The maximum
working pressure of the heat exchanger:
1. 78MPA Circulating air volume: 80m/h
Body size: 460x255x230mm
Noise: ≤38dB(A)
Anti-shock protection category: Class I
Refrigerant: R134a/120g
Features:
●Free installation, easy to install,
convenient to use
●Fast cooling
●USB fast charge
●Independent dehumidification
●Intelligent timing
● night lighting
●Small, easy to carry
●Touch remote
control.
●Low noise, peace of mind and sleep
●Low consumption, power saving, environmental protection Application: Dormitory / Outdoor Sentry / Office / Public Dormitory How to use (Instructions)
● Plug the plug into the standard,and when the “--” in the middle of the indicator light is on, press the power switch to start. Press the “Time 1” and “Time +” keys to set the temperature you want. The temperature can be cycled from 17°C to 35°C. The digital flashes. After 3 seconds, the computer automatically records and the system defaults after booting. °.
● Press the time button to set the working time of the machine. From 1 to 12 hours, it can be set cyclically. Each time you press it, it will increase by one hour. When the machine works until the time you set, it will stop automatically. The system defaults to 9 hours.
● It is best not to use the machine for more than 10 hours per time. Please let the machine have a certain rest time. When the temperature is too high, the compressor will take a break and then start automatically. This is normal. There is no special situation. Please use the machine with mosquito nets!
● Check if the water outlet pipe is blocked by debris. If it is blocked, please clear the debris to ensure that the condensed water inside can flow smoothly. In addition, put only the bucket under the tube and catch the condensed water. When the water surface is close to the end of the water outlet, please dump it in time.
● Put a stool on the side of the bed, put the machine flat on the top, adjust the height of the machine, just put it into the casing of the mosquito net. Note: the end of the air-filled end is inserted in the summer, and the end of the heating is placed in the winter. . At the same time, the outlet pipe next to it is exposed.
● Exhaust pipe installation: Install the joint of the exhaust pipe at the square port of the air outlet. The heat pipe should be smooth upwards. Do not deflect or turn the 90 degree sharp bend to facilitate the discharge of hot air.
Package included:
Reembolso por falta de entrega
