【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
[About clocks that synchronize time via radio waves]
The function of clocks that synchronize time via radio waves only works in the Japanese area. Please be careful.
[Product introduction] This is a dedicated ETC onboard equipment mounting base for Suzuki series that allows you to install a commercially available ETC in the genuine ETC mounting position.
[Size of ETC in-vehicle device that can be installed] Can be installed on objects with a height of 26 mm or less (including double-sided tape) and a width of 71 mm or less. *Separately required items: Double-sided tape for fixing ETC onboard equipment/Philips screwdriver/cutter/file/interior peeler
[Compatible models] Alto H21.12~/Altrapan H20.11~/Swift H22.9~/Spacia H25.3~/Hustler H26.1~/Wagon R/Stingray H24.9~/MR Wagon H23.1~ /SX4 H25.3~ etc. are applied. Please check your car before purchasing.
[Please note] During installation, removal of vehicle parts will be required. Removal requires technical knowledge. We recommend avoiding forced installation and requesting installation at a car parts store. . Depending on the car model grade, some processing may be required.
[Set contents] ETC mounting base x 1, screws x 2, Japanese manual x 1
[Product information]
Specially designed so it can be installed in the best position.
Clean and smart installation is possible.
To install, just use the included screws.
Commercially available ETC on-board equipment mounting base exclusively for Suzuki vehicles.
It can be installed in the same location as the genuine ETC on-board device.
[Compatible models]
Suzuki
Alto (H21.12-H26.11)
Alto/RS/Works (H26.12~)
Altrapan (H20.11~)
Swift (H22.9~/H28.12~)
Spacia (H25.3~)
Basler (H26.1~)
Wagon R/Stigray (H24.9~)
MR Wagon (H23.1~)
SX4 (H25.3~)...etc.
[Precautions for use]
1.This product is compatible. Please confirm that the size of the ETC on-board device to be installed on this product is within the dimensions.
2.This product is compatible with the vehicles listed in the Compatible Vehicles section, but may not be compatible with vehicles that have undergone minor changes after the survey date.
3. Technical knowledge is required to install this product. We recommend avoiding forced installation and requesting installation at a car parts store. If you perform the installation work yourself, please do so at your own risk.
4.This product is installed by cutting out a part of the panel in the same way as installing the genuine ETC on-board device. Depending on the car model grade, some processing may be required.
5. This product has sharp parts, so please handle with care.
6. Installation of this product may interfere with ETC's spoker volume, LED lighting confirmation, and various switch operations.
7. Since this product is a general-purpose base, there may be a gap between the vehicle panel and the ETC on-board device depending on the size of the ETC on-board device to be installed. Please be careful not to put ETC cards etc. into the gaps.
