Tk83 Flux With Brush

TK 83 Flux

Liquid, medium active flux type 1.1.2/3 A according to ISO 9454-1, alcoholic rosin solution with the addition of organic activators, max. soldering temperature 280ºC. Whole matter content 24%. Perfect for manual tinning to restore solderability.

Instructions for use (use):

The flux can be applied to printed circuit boards using foam, flux wave, immersion and using a brush. The residue does not corrode after welding, so there is no need to

wash. If necessary, remove residues with an alcohol-based PCB cleaner,

with ethyl alcohol or isopropyl alcohol.

• machine soldering in professional and consumer electronics,

• tinning wire ends,

• mixed assembly,

• soldering passivated surfaces.

Parameters | Unit of measurement |

Density at 20ºC

Density at 20ºC |

approx. 0.86 +/- 0.02

Store the material in plastic containers (e.g. HDPE, PP or PVC). Keep containers tightly closed in a dry, ventilated place out of reach of children. Do not store with oxidizing substances.

Color: nan