Mission Air® HYDRO BATH 15kW / 15000W 400V Electric Instantaneous Water Heater. Remote Control Included. This instantaneous water heater provides highly efficient, instantaneous water heating without unnecessary storage in the tank. The HYDRO BATH heater features: a digital temperature display, touch-sensitive function buttons, and a remote control included. The HYDRO BATH series is the most powerful series in the Mission Air® water heater family. It can supply hot water to up to two separate water draw-off points, such as a shower or bathtub, and a sink. An energy-saving solution! The water is heated automatically to the set temperature as soon as the device detects water flow. After a short while, a warm and pleasant water temperature is achieved, consistent with the previously set settings. The water is not preheated by the device. This solution makes the device extremely energy-efficient, heating water only when it is actually needed. There's no unwanted energy loss to maintain the water temperature in the tank, as with traditional, older-style heaters. Power consumption, occurring only during actual use, guarantees the lowest possible costs! Intuitive control! The heater features a digital LCD display, allowing you to monitor key operating parameters. The device has a touchscreen control panel with four main buttons. A remote control is also included. Setting the ideal water temperature has never been easier! The perfect heater for your bathroom! An electric water heater is the perfect solution for places without constant access to hot water from the mains. Mission Air® water heaters are characterized by simple assembly and installation. The HYDRO BATH series heaters can be installed both above and below the sink. Remember not to install the device inside a shower cabin. The device has a high IP25 protection rating, guaranteeing complete safety of use. High efficiency! The Mission Air® electric water heater allows for highly efficient, instantaneous heating of water to the desired temperature. The HYDRO BATH 15 kW model allows you to set the water temperature between 30-60℃. The minimum water flow required to activate the heater is just 1.8 l/min. HYDRO BATH series heaters feature a 65℃ water temperature limiter and 90℃ heating element overheating protection. The heater's efficiency depends on the set water flow. The higher the water flow, the lower the device's efficiency may be. The more powerful the chosen heater model, the less noticeable this phenomenon is. Technical data: Brand: Mission Air®, Model: HYDRO BATH 15 kW, Heating power: 15 kW / 15000 W, Power supply: 400V, 50/60Hz, Intended use: washbasin/sink, shower, bathtub Cable cross-section: 5 x 2.5 mm² (cable not included) Water temperature adjustment range: 30°C - 60°C, Display: digital LCD, Control: touch buttons, Rated current: 3x21.7 A Required fuse: 25 A, Diameter of the connection ports: G 1/2", Supply water pressure: 0.02 - 0.06 MPa, Water flow activating heating: 1.8 l/min, Water flow: 1.8 - 12 l/min Water temperature limiter: 65°C, Overheating protection: 90°C, Protection class: IP25, Flow rate: Δ25℃ - 7.2 l/min Dimensions: 385 x 260 x 90mm Weight: 5 kg Note: This instantaneous water heater should be installed and connected by a licensed electrician. The heater requires a permanent connection to the electrical system. Before purchasing, please ensure that your electrical system is compatible with this heater. Each device undergoes quality tests immediately after production. A trace of water around the connection is normal.
No-delivery refund
