Remote Automatic Battery Disconnect Switch 12V 200A 2x Remote Control

1. Long range: remote car battery switch, kill the car's power system with a remote control, control distance 160 feet/48.78 m.

2. Comfortable and simple: This remote electromagnetic battery switch allows you to move the trigger from under the hood to your hand.

3. working voltage: remote 12 V power switch, operating voltage range 11-15 V, suitable for most cars, small trucks, agricultural vehicles etc.

4. Low energy consumption: The switch consumes 5 mA in standby mode and about 3 W when the switch is operating, which is more energy-efficient than in new cars.

5. Stable performance: the external antenna makes the signal go further and stronger. Only when turning the battery on/off, the engine cannot be started. Project disabled by default.

Remote Automatic Battery Disconnect Switch 12V 200A 2x Remote Control Car Type 4x4/SUV Note:

1: After installation, when the relay switch is turned on, the battery power consumption will increase. When leaving the car, the main power should be switched off with the remote control for a while to avoid power loss due to excessive energy consumption and the inability to start.

2: Because cutting off the power to the entire car will cause an alarm, the onboard computer, etc., to not work, you must ensure that there is no effect after cutting off the power.

3: During normal driving, do not disconnect the relay switch to avoid increasing the generator voltage and damaging the car's electrical equipment.

Remote automatic battery disconnect switch 12V 200A 2x remote control Product weight with single packaging 0.28 kg Installation Method:

1: The red wire is connected to the positive terminal of the battery, and the black wire is connected to the negative terminal of the battery. This is the power supply for the switch, and the remote control switch consumes very little energy.

2: Two large terminals on the relay switch are the main switch. One incoming line and one outgoing line, in random order, serve the role of switching on and off.

3: When controlling the switching on and off of the negative pole, the large clamp is connected to the negative pole of the battery, and the large clamp is connected to the negative pole of the battery (the positive pole is also the same).