433Mhz 1CH RF Relay Receiver DC 3.6V-12V Wireless Remote Control Micro Receiver Mini Module Controller Switch Power Transmitter

Features: * The working voltage of the receiver is DC 3.6V-24V, which is suitable for a variety of DC motors. Remote control water heater / Remote control LED / Remote control Lamp / Remote control water pump and other remote control device; * Low standby power (4mA), no need to worry about excessive power consumption. * Stable RF signal: up to 100m in open areas, extending the receiver antenna can obtain farther and more stable signals. * The mini receiver and remote control are both RF 433mhz type, and the remote control can also be used with other RF receivers * The method of use is simple: simple wiring and simple data matching. * Multiple matching methods :many remotes can control same receiver at the same time(at most 20pcs remotes); * Super mini size, it can fit directly into the interior of various devices.

Mini receiver specifications: Frequency: 433MHz Max current : 10Amp Working voltage: DC 3.6-24V Function option: Momentary mode/Toggle mode/ Latched mode Size: 34*15mm Modulation method: ASK Number of compatible remote controls: up to 24 remote controls Matching Mode: Intelligent Learning code Remote controller parameters: RF frequency : 433MHz Control Distance : 100 meters in open space Material : Plastic Support encoding : 1527 Leaning code Battery : CR2032 (included) Size:58*28*10mm

Package Included: 1*Mini Remote Control

Operating Mode Match signal 1 Momentary mode : Press the learn button once time, Performance : Press and hold on one button -> the electrical equipment will turn ON; Release the button -> the electrical equipment will turn OFF;

Match signal 2 Toggle mode : Press the learn button Twice time, Performance : Press one button -> the electrical equipment will turn ON; Press the button again-> the electrical equipment will turn OFF;

Match signal 3 Latched mode : Press the learn button Three times, Performance : Press A button -> the electrical equipment will turn ON; Press B button -> the electrical equipment will turn OFF;

Set Up Note: Before configuring the signal, Press the learning button 8 times , to reset the receiver.

Setting mode 1 Momentary mode : STEP 1 Press the learning button on the Receiver Once . Wait for a moment , the LED will turn on , indicating you entered the learning state. STEP 2 Press one button on the Remote Control , the LED on the receiver board will flash on;

Setting mode 2 Toggle mode: STEP 1 Press the learning button on the Receiver Twice. Wait for a moment , the LED will turn on , indicating you entered the learning state. STEP 2 Press one button on the Remote Control , the LED on the receiver board will flash on;

Setting mode 3 Latched mode: STEP 1 Press the learning button on the Receiver Three times. Wait for a moment , the LED will turn on , indicating you entered the learning state. STEP 2 Press A button on the Remote Control , the LED on the receiver board will flash on; STEP 3 Press B button on the Remote Control , the LED on the receiver board will flash on;