Description:
This
delicate digital display temperature controller can set start and stop
temperature. The display and control temperature can be set to 0.1 celsius . It
is convenient to install and wiring is simple. With high precision and
long service life, it can completely replace the mechanical temperature
controller.
Features:
ABS flame retardant housing is avirulent and environmental protective,
long service life and will not discolor or be out of shape.
Probe used stainless steel material shell and resin sealing treatment, waterproof and does not rust.
Wide temperature control range from 50 celsius to 110 celsius and high temperature control precision of 0.1 celsius .
Can be installed directly or embedded in industrial control equipment panel, convenient and quick.
Widely used in the hatching area, equipment case, air conditioning system, temperature control protection and other fields.
Specifications:
Input Voltage: DC12V, DC24V, AC220V(Optional)
Output Voltage: Equal to input voltage
Temperature Measurement Range: 50~110 celsius
Temperature Control Range: 50~110 celsius
Temperature Measurement
Precision: +0.2 celsius
Temperature Control Precision: +0.1 celsius
Load Power: 120W(12V), 240W(24V), 1500W(220V)
Measuring Input: NTC10K 1 meter
waterproof probe
Output: Max 10A
Installation Hole Distance: 73mm 2.87"
Hole Diameter: 4mm 0.15"
Size: 60 x 45 x 31mm 2.36 x 1.77 x 1.22"
Instruction:
Code
Function
Setting Range
Default
P0
Start Up Temperature
50 to 100 celsius
00
P1
Shut Down
Temperature
50 to 100 celsius
00
P2
Calibration
Temperature
10 to 10 celsius
0 celsius
P3
Delay Start
0 to 10 minutes
0 minute
P0: Press Set button to enter menu, display shows P0. Press Set button again and press Up or Down button to set start up temperature.
P1:
Press Set button to enter menu, display shows P0. Press
Up or Down button
till display shows P1, then press Set button again
and press Up or Down button to set
shut down temperature.
P2:
Press Set button to enter menu, display shows P0. Press Up or Down button till display shows P2, then press Set button again and press Up or Down button to set
calibration
temperature. Measured Temperature
+
Calibrated Temperature=
Actual
Temperature, for example, if measured temperature is 0.5 celsius higher than actual temperature,
calibrated temperature should be 0.5 celsius .
P3: Press Set button to enter menu, display shows P0. Press Up or Down
button till display shows P3, then press Set button again and press Up
or Down button to set delay start time. This function is normally used for compressor refrigeration or
refrigerators
,
you can ignore it if you don"t need this function.
Package Includes:
1 x Thermostat
Note:
The input voltage of the AC220V temperature controller can NOT be AC110V.
Please make sure your power supply voltage is correct before you buy. Thanks for your understanding.
ABS flame retardant housing is avirulent and environmental protective, long service life and will not discolor or be out of shape
Probe used stainless steel material shell and resin sealing treatment, waterproof and does not rust
Wide temperature control range from 50 celsius to 110 celsius and high temperature control precision of 0.1 celsius
Can be installed directly or embedded in industrial control equipment panel, convenient and quick
Widely used in the hatching area, equipment case, air conditioning system, temperature control protection and other fields
