Step-up Boost Power Module High-voltage Generator Converter DC 7.4V To 1000kV

Features: - brand new and high quality - Made of high quality materials, - Arc for minute Reinforcing module size is 13.5cm long and 2.4cm diameter - Product introduction: This module is a high-voltage module/high-voltage generator made of high-voltage package/transformer through component circuits. - It can be used as a high-voltage source for student science experiments/electronic instruments/negative ion generators/science mini-productions. This module uses . Made of coil principle, output high voltage pulse, small size, high efficiency and high discharge intensity. - Product use: The module is divided into input and output. The red and green wires are the input terminals, the red and green wires are the negative terminals, and the output is two high-voltage wires of the same color. The input terminal can be connected to a battery to generate a high-voltage arc. - Please operate the module in strict accordance with the usage and precautions, otherwise the module will be easily damaged! - About input power: 3.7V lithium battery input. NiCd/NiMH battery pack, 4V or 6V lead-acid battery, etc. Input voltage and current affect output high voltage and arc distance. Product parameters: - Module model: MC01 - Colour: Black - Physical volume: length 88.5, diameter 26 sections 24mm (measured with precision vernier calipers) - Input parameters: 3.7-7.4V/4A - Input line length: about 10 cm (red positive green negative) - Output parameters: 800-1000KV/0.5A - Cord length: about 16 cm - High voltage diode discharge distance: 1.5cm-2cm (not more than) Precautions for use: - The module should avoid power on when the module is under high voltage and no load. Before power-on, the high-voltage discharge terminal distance must be adjusted. The arc distance at the output is proportional to the battery voltage and capacity used. - When testing arc distance, the test should be done from short to long. It is strictly forbidden to exceed the maximum arc starting distance of the module. Since the high voltage energy cannot be released, the module is easily damaged. - The power of the module is large, the internal heat is not suitable, and it is not allowed to work for a long time. - Small-capacity lithium battery is connected in series with 7.2V. The voltage measured under arcing has dropped to around 4V. The smaller the capacity, the lower the pull voltage. Therefore, it is recommended to use a lithium battery above 2000MA, preferably a battery above 4000MA. Package Included: 1* High voltage package inverter Notes: 1. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture. 2. Please allow a slight deviation between the data and the manual measurement.