Main Specification:
3.5 inch high contrast color LCD monitor
5 meters(15ft) Night vision
Two Way Talk back function
Feeding alarm, setup anytime as you want
Long battery life, stay up to 24h in VOX mode
Working mode, Normal mode/VOX Mode optional
Room temperature display, Celsius/Fahrenheit Optional
8 lullaby playback, ensure your baby down into sleep deeply
Multiple Language support, English/Russian/French/Spanish/Portuguese/Italian/German/Turkey Optional
Using Methods:
Step 1: connect the mains socket to get start the baby unit, a blue light led will display when working
Step 2: charging the parent unit fully before using, press and hold the power key at least 3 seconds to turn on it
Step 3: place the baby unit in a convenient location and adjust the camera until you are satisfied with the image in the parent unit
Packing List:
1 x Camera
1*LCD display
2 x Power Adapter
1 x English User's Guide
Teachnical Features:
Frequency: 2.4GHz Digital
Modulation Mode: GFSK
Operating temperature: -10 ~ +45 Cesius degree
Operating Humidity: <85%
Transmission power: 17dBm
Transmission frequency: ISM 2400 - 2483.5 MHz
LCD Monitor:
LCD size: 3.5 inch color Display
Resolution: 640*480@24fps
Battery: Li-polymer 750mAh
Power supply: 5V / 1000mA DC
Receiving sensitivity: -90dBm
Dimensions(W*H*D): 120*85*23mm
IR Camera:
Sensor: 0.3Mega pix CMOS
Minimum illumination: 0Lux(IR on)
Night Vision: 15ft(5m)
Built in Lighting sensor/Temperature sensor
Dimensions(W*H*D): 90*80*52mm
NOTE: it only powered by the power supply adapter
Warm tips:
1. If any problems of the device occurred. Press "OK/Menu" Key to entry register screen,
then push the pair key on the back of baby unit within 10 seconds, camer and Monitor will pair directly.
2. Please charge the unit before use.
3. Recommended to set the volume to medium level to extend the service life.
4. Do not place the parent unit too close to the camera which may cause noise.
5. The camera needs to be adjusted manually. It cannot be remotely controlled.
No-delivery refund
