0.2/0.3/0.5/0.7/1.0ML Conductive Adhesive Glue Low Resistance Quick-drying Conduction Paste Silver Paint PCB Flex Cable

Solid powder: 60-80% Specific gravity: 25 centigrade1.46-1.48g/cm3 Resistance: < 0.02 ohm /sq Membrane thickness: 12 microns Viscosity: > 20000CPS Shielding effectiveness: > 80dB Recommended film thickness: 12-16 microns Recommended diluent: anhydrous ethanol Dilution ratio: conductive paint: diluent =1:0.7-0.8 (weight ratio). Humidity test: 85 centigrade /85%, relative humidity 7 days, resistance value unchanged. Drying conditions: 60 degrees 20 minutes Features: Silver conductive glue paste tool for electronics PCB circuit board repair. Easy to use, just plug and play. Ideal for rigid and flexible substrates. Versatile, it can be used for repairing membrane switches, and home supplies, electrical items, CPU in computer, LED display, LCD display, optical fiber communication equipment, controller, heat sink and LED etc.

Usage method: 1. Apply the silver glue/paste in the place you want. 2. After the desired tracks get covered, Please allow one hour for drying. 3. If you want it drying rapidly, blow it with a hair dryer for 10-20 minutes will be OK. 4. Do not remove the needle before use, and twitch back and forth to make the conductive silver paint fully mixed.

Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.

Package list: 1 x Conductive Adhesive Glue