Solar Lamp Board Radar Induction 15s Sensing Light Control Module for 3.2V 3.7V Battery

Feature: 1. Good Sensing: The induction signals can penetrate glass, plastic, wall, etc., and the sensing distance is about 5 to 10 meters, very useful. 2. Reliable Use: The charging current is less than 2A, while the discharge current is less than 1.5A, also ensures a short sensing time of 15s. 3. Lamp Control: Only compatible with 3.2V for LiFePO4 battery and 3.7V lithium battery as well, more than enough to support the street lamp. 4. Working Tips: Does not have overcharge and over discharge protection, and built in protection board is needed when connecting the battery. 5. Easy to Install: Comes with a compact size and a light weight, the convenient installation can be quickly completed within several minutes. Specification: Item Type: Solar Lamp Board Material: PCB Rated Voltage: 3.2V, 3.7V Solar Panel Input Power: <6V LED Power: <10W Induction Mode: Microwave Radar Induction Induction Distance: Approx. 5 ~ 10m / 16.4 ~ 32.81ft Sensing Time: Turn to low bright after 15 seconds of high light. Package List: 1 x Solar Lamp Board 1 x English User Manual Note: 1. When testing the induction mode, there should be no moving objects within 12 meters, including the movement of hands and feet, otherwise it will be detected; 2. When multiple sensing modules are together, there will be mutual interference, resulting in insensitive sensing, or false triggering; 3. The surfaces of the patch part is the emitting surfaces, and self adhesive or glue cannot be attached here, otherwise it will shorten the induction distance; 4. The distance between the front and back of the sensor is not less than 2CM from the metal; 5. The surfaces of the patch parts should not be covered by metal, otherwise the detection signal will not be transmitted and the sensing distance will be shortened.